Job board · Northwest Arkansas

NWA trade jobs

Explore employer listings in HVAC, electrical, plumbing, utilities and aircraft manufacturing. Recently checked listings appear first, with earlier postings below.

7 recently checked employer listings · 4 earlier postings · 7 employers

Compare employer postings

Select a trade, city or employer. Recently checked listings have an employer application page recorded within the past 14 days. Earlier postings retain their original check dates. Pay appears where the employer states an hourly range. Explore dated classes and practical workshops.

Dates grouped for 2026-11-18 (Central time). Source-check dates remain the original observations; confirm current availability with the employer.

Before you apply or pay for training

Open the employer's own posting and separate required qualifications from preferred ones. An apprentice or laborer title does not always mean no experience is needed.

Before paying for a course, ask the employer:

OSHA 10/30 cards record course completion; they are not certifications or trade licenses. Check the employer's actual requirement before choosing a course.

Need training first? Compare local entry routes in Start a Trade. For help with an application or resume, contact your nearest workforce center.

Recently checked employer listings (7)

Recently checked

Journeyman Electrician

Paschal Air, Plumbing & Electric

LocationSpringdale, AR
TradesElectrical
EmploymentFull Time

Residential and business electrical installation, service and troubleshooting. Applicable electrical licenses and a valid driver’s license with a good driving record are required. The employer lists this as full time; numerical pay and minimum years of experience are not published.

Requirements and work details

Required

  • Applicable state/local electrical licenses
  • Valid driver's license and good driving record
  • Electrical tools, code, diagnostic and safety knowledge

Work details

  • Safety-sensitive role; the employer specifies preemployment drug screening and a background check.

Employer source checked November 18, 2026.

Suggest a correction

Recently checked

Pump Station Operator

Springdale Water Utilities

LocationSpringdale, AR
TradesUtilities, Mechanical, Controls
Employer closing policyOpen until filled

Maintain pumps, motors, controls, generators and water-storage facilities. The role requires relevant maintenance knowledge and a diploma or equivalent, with a Class II Water Distribution Operator license within three years and required CDL within six months. Scheduled on-call duty applies. The posting says open until filled.

Requirements and work details

Required

  • High school diploma or equivalent
  • Pump/motor/electrical/SCADA operating and maintenance knowledge
  • Obtain Class II Water Distribution Operator license within three years
  • Obtain required Arkansas CDL within six months

Work details

  • Scheduled on-call and outside-hours work; safety-sensitive position.

Use the employer's general application and enter Pump Station Operator in the position field.

Employer source checked November 18, 2026.

Suggest a correction

Recently checked

Utility Restoration & Relief Operator

Springdale Water Utilities

LocationSpringdale, AR
TradesConcrete, Utilities, Heavy Equipment

Restore sidewalks, driveways, curbs and other surfaces after utility work. The posting requires at least two years of hands-on concrete experience and a diploma or equivalent. Candidates must obtain and maintain the relevant CDL and earn a Class II Water Distribution Operator license within three years; the CDL deadline is not stated. On-call duty applies.

Requirements and work details

Required

  • At least two years of hands-on concrete experience
  • High school diploma or equivalent
  • Obtain Class II Water Distribution Operator license within three years
  • Obtain and maintain the CDL required for assigned duties; timing not stated for this role

Work details

  • Scheduled on-call duty and periodic outside-hours work; safety-sensitive position.

Use the employer's general application and enter Utility Restoration & Relief Operator in the position field.

Employer source checked November 18, 2026.

Suggest a correction

Recently checked

Leak Detection Technician

Paschal Air, Plumbing & Electric

LocationSpringdale, AR
TradesPlumbing, Leak Detection
EmploymentFull Time

Locate hidden residential water leaks in Springdale using diagnostic equipment, explain repair options to homeowners and complete plumbing repairs. Paschal describes this as an experienced role and seeks plumbing experience; residential plumbing experience is preferred, with leak-detection equipment training available for the right candidate. A valid driver’s license with a clean record and strong troubleshooting and customer-service skills are required. Four- or five-day schedules depend on availability; no Sunday shifts are listed.

Requirements and work details

Required

  • Valid driver's license with a clean driving record.
  • Strong diagnostic, troubleshooting and critical-thinking skills; ability to interpret plumbing systems and identify potential sources of water loss.
  • Excellent communication and customer-service skills; comfort using tablets and mobile software for documentation.
  • Professional appearance and positive attitude; ability to lift equipment and work in residential environments.

Preferred

  • Previous residential plumbing experience.
  • Experience with leak-detection equipment is a plus; the employer says training is available for the right candidate.

Work details

  • Residential leak detection, diagnostics and plumbing repairs, with paid equipment training described by the employer.
  • Four- or five-day work schedule depends on location and availability; the posting lists no Sunday shifts.

Employer source checked November 18, 2026.

Suggest a correction

Recently checked

Facility Maintenance Helper

U-Haul

LocationRogers, AR
TradesFacility Maintenance, Construction Helper
EmploymentFull time

Help maintain U-Haul facilities from the Rogers location through repairs, painting, basic construction tasks and renovation-site cleanup. A diploma or equivalent, valid driver’s license and good driving record are required. The posting describes ongoing training and does not state a minimum number of years of prior experience. Applicants must be work-authorized without sponsorship; U-Haul also states a nicotine-use hiring restriction in Arkansas.

Requirements and work details

Required

  • High school diploma or equivalent.
  • Valid driver's license and ability to maintain a good driving record to operate commercial motor vehicles; follow applicable vehicular regulations.
  • Legal authorization to work without employer sponsorship; the posting says this position is not sponsorship-eligible.
  • The posting says U-Haul will not hire or rehire nicotine-product users in Arkansas.
  • Perform the stated physical work, including prolonged standing/walking, bending, crouching, reaching and lifting a minimum of 50 pounds assisted or unassisted; the employer states accommodations are available on request.

Work details

  • Facility repairs, painting, basic construction and cleanup; assist skilled workers and participate in U-Haul University education.
  • Rogers base at 2301 S 8th Street; work can cover facilities within a geographic area. State workforce application details require an account.
State workforce listingApply through Arkansas JobLink

Applications continue through Arkansas JobLink and require sign-in.

Employer source checked November 18, 2026.

Suggest a correction

Recently checkedHourly pay published

Welder

Cram-A-Lot / J.V. Manufacturing, Inc.

Typical starting wage $18–$20/hour, based on experience.

LocationSpringdale, AR
TradesWelding, Manufacturing

Fit and weld structural and sheet-steel components for waste and recycling equipment at Cram-A-Lot’s Springdale factory. The employer accepts a diploma or GED, six months of related experience, or a combination; welding skills, basic blueprint reading and precise tape-measure use are needed. Typical starting pay is $18–$20 per hour based on experience. The listed schedule is Monday–Thursday, 5:30 a.m.–4 p.m., with possible overtime on Fridays.

Requirements and work details

Required

  • High school diploma, GED, or six months related experience, or a combination of education and experience.
  • Welding knowledge and skills to lay out, fit and weld structural and sheet-steel components.
  • Read and comprehend simple English instructions, correspondence and memos; retain information used daily.
  • Use basic arithmetic, fractions and decimals; read a tape measure within 1/16 inch and understand a basic blueprint.
  • Perform the described physical work, including occasional lifting or moving up to 50 pounds and the stated vision requirements.

Work details

  • Springdale factory welding on structural and sheet-steel components for waste and recycling machines.
  • Monday–Thursday 5:30 a.m.–4 p.m.; possible overtime, including Fridays. Starting wage is described as typically $18–$20/hour based on experience.
Employer job description (PDF)Application form (PDF)

Download the employer’s application form. Submission instructions appear in the employer posting.

Employer source checked November 18, 2026.

Suggest a correction

Recently checked

Technical Support

Cram-A-Lot / J.V. Manufacturing, Inc.

LocationSpringdale, AR
TradesEquipment Support, Electrical, Hydraulics, Mechanical

Support waste and recycling equipment users from the Springdale opening listed by Cram-A-Lot. The role dispatches technicians and helps troubleshoot electrical, hydraulic and mechanical issues by phone. A diploma or GED, strong customer communication and the ability to organize work independently are required. Experience diagnosing and repairing this equipment is preferred; no minimum number of years is stated.

Requirements and work details

Required

  • High school diploma or GED.
  • Strong customer-facing skills and verbal/email communication.
  • Organize and prioritize workload to meet deadlines; urgency in resolving customer problems.
  • Work independently with little supervision.
  • Perform the described physical tasks, including occasional lifting or moving up to 50 pounds and frequent lifting or moving up to 10 pounds, with stated vision requirements.

Preferred

  • Experience diagnosing and repairing waste and recycling equipment.

Work details

  • Dispatch technicians and troubleshoot electrical, hydraulic and mechanical equipment issues by phone.
  • Springdale equipment-support work; diagnosis and repair experience is preferred.
Employer job description (PDF)Application form (PDF)

Download the employer’s application form.

Employer source checked November 18, 2026.

Suggest a correction

Earlier employer postings (4)

Earlier employer postingHourly pay published

HVAC Truck Based Mechanic Apprentice (union)

Johnson Controls

$24–$30/hour, determined by the CBA/rate sheet.

LocationSpringdale, AR
TradesHVAC, Controls
EmploymentFull-Time

Work on client-site HVAC equipment and controls, with employer and union training. The posting requires at least one year of relevant experience, a valid driver’s license and United Association membership or willingness to join. Technical trade-school or college study is preferred.

Requirements and work details

Required

  • At least one year of industry/HVAC mechanical-service experience
  • United Association membership or willingness to join
  • Valid driver's license

Preferred

  • One to two years of technical trade-school or college study

Work details

  • Client-site mechanical HVAC and controls work; required union training attendance.

Employer source checked October 30, 2026.

Suggest a correction

Earlier employer posting

Journeyman Service Electrician

Multi-Craft Contractors, Inc.

LocationSpringdale, AR
TradesElectrical, Industrial Maintenance

Commercial and industrial electrical troubleshooting, repairs and installation. The posting requires an Arkansas journeyman license, a diploma or equivalent, a valid driver’s license and relevant electrical experience. Industrial controls and PLC experience are preferred.

Requirements and work details

Required

  • Arkansas journeyman license
  • High school diploma or equivalent
  • Valid driver's license
  • Commercial or industrial electrical experience

Preferred

  • Industrial controls/PLC experience

Work details

  • Electrical troubleshooting, repairs, installation and maintenance.
Employer posting and application

Posting text rechecked November 18; confirm application availability directly with the employer.

Employer source checked November 18, 2026.

Suggest a correction

Earlier employer posting

Service Journeyman Plumber

Multi-Craft Contractors, Inc.

LocationSpringdale, AR
TradesPlumbing

Plumbing installation and service with an on-call rotation. A diploma or equivalent and valid driver’s license are required; at least three years of plumbing experience is preferred. Confirm the required credentials with the employer.

Requirements and work details

Required

  • High school diploma or equivalent
  • Valid driver's license
  • Relevant mechanical, mathematical and technical skills

Preferred

  • At least three years of plumbing experience

Work details

  • On-call rotation. Confirm the required plumbing credentials with the employer.
Employer posting and application

Posting text rechecked November 18; confirm application availability directly with the employer.

Employer source checked November 18, 2026.

Suggest a correction

Earlier employer posting

Manufacturing Technician

Game Aerospace

LocationBentonville, AR
TradesAviation, Manufacturing, Composites
EmploymentFull Time
ShiftDay

Fabricate, trim and finish composite aircraft components on a full-time day shift. A diploma or equivalent, engineering-drawing interpretation and mechanical aptitude are required. Technical training and related manufacturing experience are preferred. The listing describes negligible travel; numerical pay is not published.

Requirements and work details

Required

  • High school diploma or equivalent
  • Engineering-drawing interpretation
  • Hands-on mechanical aptitude
  • Safety and physical-work requirements

Preferred

  • Technical training
  • One to five years of aerospace, composites or advanced-manufacturing experience

Work details

  • Full-time day shift; the posting describes negligible travel and says the employer does not offer immigration sponsorship.

Employer source checked October 10, 2026.

Suggest a correction

Past application deadlines (0)

Share a job or project

Email the employer link or describe the work, location, pay basis and timeline for review. Submitting a request does not publish a listing. Do not send job applications to the guide.

Email a listing
Employers set requirements and make hiring decisions. The guide does not collect applications or payments. License requirements depend on the trade, project type and cost. Check the appropriate current state licensing authority before hiring. View dated contractor records.

Free weekly, for NWA homeowners and trade pros

Local events, one practical fix, and what changed in the trades this week. No spam, no paid placement.

Subscribe free